WBT-V3 and WBT2-V4 are kits for converting keyboards and mice from wired to wireless USB. In most cases, people only use one kit. If there are special needs, multiple kits need to work at the same time. In order for multiple kits to not interfere with each other, the frequency bands of the kits need to be distinguished. Below is a screenshot of the setting steps.
Software Download and Notes
https://drive.google.com/file/d/1r1DRakl1jM-3VVl4rQWhwGBxy33nCAY9/view?usp=drive_link
How to connect WBT-V3 to a computer to use the setup software
Use a data cable to connect the USB port of the computer and the TYPE port of WBT-V3.
Please use a high-quality data cable. If the connection cannot be successfully connected, please change the USB port on the computer and try again.
Try to use the interface on the motherboard on the back of the computer. The interface on the motherboard has a stronger power supply capacity and a more stable connection.
How to connect WBT2-V4 to a computer to use the setup software
First, turn off the WBT2-V4, then long press the working mode switch button, turn on the power switch, and use a USB data cable to connect the USB port of the computer and the USB-A port of the WBT2-V4 far away from the PCB. Please note that only the USB-A port far away from the PCB can connect to the setting software, and the other USB-A port cannot communicate with the setting software.
Modify the frequency band of WBT-V3, After connection, the modification method of WBT-V3 and WBT2-V4 is the same
First, modify the frequency band of WBT-V3.
By default, both WBT-V3 and receiver use frequency band 0. Multiple WBT-V3 can be set to different frequency bands. The corresponding receivers also need to be set to the same frequency band.
Modify the receiver’s frequency band
How to use multiple dongles with one WBT-V3
If you need to use one WBT-V3 with multiple dongles, first of all, the WBT-V3 and the dongle need to work on the same frequency band, and use different dongle numbers to distinguish them. If it has not been modified before, then there is no need to change the frequency band. All orders are set to frequency band 0 by default when shipped. You only need to change the dongle number. Insert the dongle into the USB port of the computer, and then open the setting software
All receivers are numbered 1 by default. If you need to use the second one, set the second dongle number to 2. When using it, use the shortcut key ctrl+alt+shift+2 to switch to the second receiver.
